Single Station 1 Die Head Accmulator Type Plastic Blow Molding Machine For Big Size Plastic Barrels
SLBC series: (German model)
1: linear guide support single frame, finite element analysis of the design, to ensure adequate clamping force, not up mode. All parts of the machine is made by advanced numerical control equipment with high precision.
2:System tool function screen: Mainly used to prompt system contrast, device number and system time correction function.
Power-on display: When the control system is powered up, the display shows the screen.
Control main screen: After pressing the power-on display screen, the display shows the screen. This screen is the integrated control screen. Press the corresponding function key to control the corresponding function. At the same time, the heating function and motor running can be started.
Manual operation screen: mainly performs various manual operation functions.
Temperature control setting screen: Press the temperature key to enter the temperature control setting screen 1 screen, which is mainly used to set the temperature value, upper deviation, lower deviation and lower limit parameters of each heating section. Press the "Next Page" button of "Temperature Control Setting Screen 1" to enter the temperature control setting screen 2, and press the "Previous Page" button of "Temperature Control Setting Screen 2" to return to the "Temperature Control Setting Screen 1" screen. .
| SPECIFICATION | SLBC-90 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 60 |
| OUPUT(DRY CYCLE) | PC/HR | 450 |
| MACHINE DIMENSION (LxWxH ) | MM | 6300x3400x4200 |
| TOTAL WEIGHT | TON | 14T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 260 |
| PLATEN OPENING STROKE | MM | 400-1200 |
| PLATEN SIZE(WxH) | MM | 900x1000 |
| MAX MOULD SIZE(WxH) | MM | 750x1200 |
| MOLD THICKNESS | MM | 410-700 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 90 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 140 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 5 |
| EXTRUDER MOTOR RATED POWER | KW | 45 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 4 |
| POWER OF DIE HEATING | KW | 18 |
| MAX DIE-PIN DIAMETER | MM | 400 |
| POWER | |
| MAX DRIVE POWER | KW | 57 |
| TOTAL POWER | KW | 105 |
| FAN POWER OF SCREW | KW | 4 |
| AIR PRESSURE | MPA | 0.8-1.2 |
| AIR CONSUMPTION | M3/MIN | 0.8 |
| AVERAGE ENERGY CONSUMPTION | KW | 38 |
| ACCUMULATOR CAPACITY | L | 8 |
Product Tags:
|
|
60L Accumulator Blow Moulding Machine , PE Barrel Blow Molding Machine Images
|
