U series Double Station High Speed 4 Layer 1 Die Heads Blow Molding Machine for Plastic Stacking Barrel
SLBU series:
1. The pressure of the machine system has been set before the factory, no special circumstances can be arbitrarily adjusted to avoid the pressure too high or too low to cause damage to the hydraulic system or affect the normal operation of the machine.
2. Workers are strictly prohibited on the machine to add materials to avoid electric shock or scald and fall at high altitude.
3. The blow molding machine in the mode switch action, operators are prohibited from entering the safety door area to avoid being sandwiched or hit.
4. Fully automatic blow molding machine in the normal operation of production, do not use your hands to break the material that is extruding, to avoid high temperature material and electric heat cutting knife burns or mold clamping.
5. When adjusting the motion-shifting, motion-closing photoelectric switch, must turn off the main oil pump, avoid the occurrence of unsafe accidents.
6. In case of emergency, quickly press the red emergency stop button to prevent accidents.
| SPECIFICATION | SLBU-65 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 5 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6,8 |
| OUPUT(DRY CYCLE) | PC/HR | 1000x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 4000x2300x2200 |
| TOTAL WEIGHT | TON | 6.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 220-520 |
| PLATEN SIZE(WxH) | MM | 400x430 |
| MAX MOULD SIZE(WxH) | MM | 460x430 |
| MOLD THICKNESS | MM | 255-280 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 65 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 70 |
| BARREL HEATING POWER | KW | 15 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 15 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 180 |
| POWER | |
| MAX DRIVE POWER | KW | 18 |
| TOTAL POWER | KW | 50 |
| FAN POWER OF SCREW | KW | 2.4 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.4 |
| AVERAGE ENERGY CONSUMPTION | KW | 18 |
Product Tags:
|
|
4 Layer Toggle Type Plastic Barrel Blow Molding Machine ABS Automatic Bottle Images
|
